水质分析仪器-k8凯发真人版

aj-1000 flow injection analyzer

applications

the instrument is designed for the determination of cyanide, volatile phenol, anionic surfactant, ammonia nitrogen, chemical oxygen demand, sulfide, total phosphorus, total nitrogen, nitrate / nitrite, hexavalent chromium and other ingredients in surface water, groundwater, drinking water and environmental water.

features

-fully automatic multi-channel analysis, the workstation software can run up to 8 channels simultaneously. the analysis method is easy and fast to change; the entire analysis process is completed automatically without manual operations;
-peristaltic pump: 12-channel integral gland peristaltic pump, pump speed can be programmed between 1-100 rpm;
-auto sampling system: polar-coordinate auto sampling system, with 162 positions for sample tube, cell for needle washing and 2 large cells for cleansing liquid, to meet the needs of large sample volume analysis;
-super long life-time led light source up to tens of thousands of hours. high-sensitivity blue-light enhanced photo detector, and the wavelength range is 340nm-1050nm;
-high-precision a/d converter, the detection dynamic range is not less than 3 orders;
-diluter: it can automatically make standard solutions for calibration curve and online dilution of out-of-range samples with a dilution factor of 1.5-10000 times;
-reagent dosage: 10ug-100ug depending on the method;
-response time: each method is different, the fastest is 120 samples / hour.

specifications

linear range: 0.01 -2mg / l (based on p);
mdl: <0.005 mg / l (based on p);
response time: 30 samples / hour;
precision: <1.0%;
note: the specifications will vary on the measured substances.

follow us on wechat

contact
  • headquarter shanghai
  • tel:400-832-8801;021-56606703
  • fax:021-36212790
  • email:15910613219@anjie.net.cn
  • contact:mr. liu
网站地图